What Is the Standard Deck Board Size? Common deck board widths are 4”, 6” and 8”. The widths are readily available in most lumber or building supply stores, and the number of pieces easily calculated into deck dimensions. Other widths may be used for aesthetics and effect.

What size wood should I use for a decking frame?

Commonly used joist sizes are 2-by-6, 2-by-8 and 2-by-10. For example, when you space joists 16″ apart — which is standard for residential decks — a deck spanning 9 1/2′ would require 2-by-6 joists, a 13′ deck would need 2-by-8 joists and a 16′ deck calls for 2-by-10 joists.

Should I use 2×6 for decking?

2×6 is thicker and is stronger, but is also more expensive. Spacing between deck boards provide a few critical functions. The primary function is to drain water from the deck. Gaps that are narrow (1/8”), can catch debris, specifically on top of the joists, and can be difficult to clean out.

Can you use 2×4 for decking?

The short answer is yes. 2x4s can work for deck joists. However, they aren’t ideal for spanning long distances without bending or breaking, so you have some limitations. Choosing 2x4s for a low-sitting deck is perfect for keeping your feet out of the mud.

Can I use 2×4 for deck frame?

The short answer is yes. 2x4s can work for deck joists. 2x4s are the smallest dimensional option, making them great for low, ground-level decking if they’re spaced no further than 12” on center. “On center” is the term to measure from one joist to the next, starting from one center to the center of another.

Can you use 2×4 for a deck?

How far can a 2×4 span for a deck?

2×4 joists spaced 12” on center can span no more than 5’5” between supports. This guideline limits a deck built entirely from 2x4s to a small size, or you would need to add a mid-span support beam. Most deck joists are 16” on center, which allows you to span 1.5 times the depth in feet.

How close to the ground can you build a deck?

There is no standard height for a “grade-level” deck—the maximum measurement from grade to the deck surface could be 6 inches, 12 inches, 24 inches, or more. But generally speaking, I apply the term to decks that are up to 30 inches above grade, since guardrails are required for any decks that are higher than that.