The honda pilot bolt pattern is listed as pcd 5×114.3 (5X4.5).
What size tires go on a 2004 Honda Pilot?
| 2004 Honda Pilot | ||
|---|---|---|
| Rim Size | Tire Sizes | Honda Pilot Options |
| 16-Inch | 235-70-16 | EXLX |
What is the bolt pattern on a 2005 Honda Pilot?
Honda – Vehicle Bolt Pattern Reference
| YEAR | MAKE | COMMENTS |
|---|---|---|
| 2003 | Honda | 5 lug 4.5 inch or 114.3mm High Positive Offset |
| 2004 | Honda | 5 lug 4.5 inch or 114.3mm High Positive Offset |
| 2005 | Honda | 5 lug 4.5 inch or 114.3mm High Positive Offset |
| 2006 | Honda | 5 lug 4.5 inch or 114.3mm High Positive Offset |
What is the bolt pattern on a 2006 Honda Pilot?
This Factory OEM Honda rim comes equipped on a 2006 Honda Pilot. This is an aluminum wheel with a diameter of 16″ and a width of 6.5″. This Honda Pilot wheel has 5 lug holes and a bolt pattern of 115mm.
What kind of tires does a Honda Pilot use?
A midsized SUV like the Honda Pilot typically uses allseason tires, and Bridgestone’s Dueler H/P Sport A/S tires often serve as Original Equipment.
What size tires are on a 2003 Honda Pilot?
P235/70R16
2003 Honda Pilot/Tire size
Can I run 5×114 3 on 5×115?
no they are not the same. 5×114. 3mm (5×4. 5″) will not fit properly on a 5×115 bolt pattern.
What is the smallest tire size for 2012 Honda Pilot ex?
Web site states that the Smallest tire size for Web site states that the Smallest tire size for 2012 Honda Pilot EX is 245/65R17 however at Costco and other searches are showing that 235 tire width is also ok (this is for steel rims 17×7.5).
What size is a 5 lug bolt pattern?
A bolt circle of 5 x 4.5 would indicate a 5 lug bolt pattern on a circle with a diameter of 4.5 inches. There are four important measurements that are used to categorize and identify a wheel for fitment purposes. Rim Diameter The actual diameter of the wheel at the point where the tire bead seats ( NOT the outer lip of the rim).
What is the bolt pattern and wheel size of a Honda Accord?
HONDA Models / Bolt Pattern and Wheel Size Information: 1982-89 HONDA ACCORD Bolt Pattern: 4 X 100 Stud Size: 12 X 1.5
How do you measure wheel lugs?
If there is an EVEN number of lugs: Measure center-to-center on lugs directly across from each other. If there is an ODD number of lugs: Measure from the CENTER of one lug to the OUTER EDGE of the hole diagonally across from it. Alloy wheels should always be installed using a torque wrench ensuring proper mount.
