To determine the appropriate sleeve size, it is first necessary to clean the shaft carefully. The diameter of an undamaged section of the seal counterface should then be measured on at least three different planes. The arithmetical mean of these measurements determines the size of SKF SPEEDI-SLEEVE.
How do you cut a Speedi sleeve?
A SPEEDI-SLEEVE can be removed by applying heat to the sleeve with an electric heat blower, which will expand it enough to let it slide off the shaft without causing damage. by using a pair of wire cutters starting at or near the flange and applying a twisting motion.
Can you replace a spindle on a trailer axle?
Far from a do-it-yourself job, trailer axle spindle replacement requires more than average results. Each new spindle addition must be installed securely and absolutely square with the trailer axle. If it is off by any amount, wheel tracking problems and premature tire wear are imminent.
What is the difference between shaft and sleeve?
As nouns the difference between shaft and sleeve is that shaft is the long narrow body of a spear or arrow while sleeve is the part of a garment that covers the arm.
How do shaft repair sleeves work?
It is a very thin- walled sleeve, with a near-perfect finish and hardness for its purpose, which is simply pushed in position over the worn shaft and after installing a new seal, the shaft is as good as new – if not better.
What is a speedi seal?
SPEEDI-SLEEVE® THE SPEEDI-SLEEVE® CONCEPT. the quickest and sensible way. to repair worn shafts. To seal efficiently, radial shaft seals must run against a smooth round surface – the seal counterface.
What is a harmonic balancer repair sleeve?
“A repair sleeve will fix the end of your harmonic balancer. The grooves on the mounting surface of my harmonic balancer looked unfixable. I wanted to make sure oil didn’t continue to leak past these grooves.
